TSWB系列 带低水位报警的数显温度开关用于监控水温，带高低设定点。低设定点能够手动或自动复位。它还带有电导探头输入，供12VAC的电源给电导探头用于监测水位是否到达低限。有三个继电器开关输出：温度高限，温度低限，水位低限。如果使用TS2-K数显温度开关参数配置器可快速地给TSWB系列配置参数。

TSS2系列 双输出数显温度开关用于控制加热系统或冷却系统的温度。他采用了两路输入信号和独立的继电器输出组成双路系统。TSS2系列有34种可编程配置的参数来实现多种功能。除了设定点外，需要安全密码才能配置参数。温度探头需另外购买。

TS系列 数显温度开关用于加热和冷却系统中。可通过前面板上的按键方便地配置12种参数，简单可靠。用户可配置：设定点，加热/冷却控制，滞后时间，循环时间，化霜时间。 它还带有错误或报警状态指示，按键安全密码保护。采用三位红色LED显示温度，可显示华氏度或摄氏度。可选用110VAC供电或12VDC供电。TS系列还带有5英尺 (1.5 m) 电缆的探头，用于盘装的所有安装件和操作手册。

The microprocessor based Series TSX offers a low cost solution for cooling applications. Units are designed to accept up to two temperature probes selectable between PTC or NTC thermistor input. The probe temperature is displayed on the bright 3-digit LED.The Series TSX offers 23 programming parameters for specific application requirements. To quickly program multiple units with the same settings, use the configuration key TS2-K (sold separately). The user can define set point, hysteresis, probe error performance, and defrosting. The defrosting mode can also be initiated or interrupted manually by pressing the up arrow button. Units include password protection to secure from unwanted setting changes except for set point adjustment. If required, the keypad can be locked out so no adjustments can be made.Select from single output units with one 16A SPST relay dual output with one 16A SPST relay and one 8A SPDT relay for defrosting or three output models with one 16A SPST, 8A SPST and ** SPDT. The temperature switch includes one NTC probe, gasket, mounting clips, and instruction manual.

TS2系列 数显温度开关用于监控加热/冷却系统，它有十二种可编程的功能可为不同的应用场合定制配置。采用了15(5) Amp的单刀双掷继电器输出来驱动马达，压缩机或风机。为了更方便设备生产厂家，TS2还可以采用一键配置的方式来批量配置多台仪表。配置多台仪表非常简单，先设置好一台仪表，然后连接上配置电钥（需另外购买），按键下载这台仪表的配置参数到电钥上。当连接电钥到任何一个温度开关上按一次按键就能上载这些配置参数而配置好温度开关。TS2的功能还有：设定点可调，定时化霜，压缩机平均时间，延时控制。采用密码保护按键设置。TS2数显温度开关和PTC （1000欧姆，摄氏25度）配套使用，需单独购买。

TCS系列 热电偶温度开关用于加热或冷却系统里监测和控制温度。它的量程范围宽，带两个可设定的报警点，自带蜂鸣器来报警或故障错误提醒。用户能自己设定设定点，加热/冷却控制方案，循环控制时间，报警设定，负荷状态和探头调整。TCS热电偶温度开关带有设置参数密码保护，故障错误/报警指示。它采用了明亮的LED数显。可采用通用配置电钥（需另外购买）来批量快速配置参数。 TCS系列还包括了用于盘面安装的卡件，接线板保护盖和操作手册。

产品介绍：设计CE符合性：2004/108/EG电磁兼容性 (EMC)产品安全性：2001/95/EC产品安全EMC: EN 60730-1: 2002产品安全性：EN 60730-1: 2002设置点范围可调-10 … +15 °C（出厂设置：5 °C） 开关差：≤ 2 ±1 °C  重复性：±0.5 °C    传感器感应距离：约60 cm  开关输出：转换电接点，**250 V AC，**10 A，电接点材料：Ag / Ni (90 % / 10 %)，镀金 (3 μm)。允许温度：储存温度：-30 … +70 °C，环境温度：-30 … +70 °C, max. 85 % rH, non-condensing，介质温度：w + *小2 K … 70 °C，（w = 所选设置点)。防护等级：IP 65 ，符合EN 60529 / lEC 529标准

The Series TSX3 Digital Temperature Switch was designed to control the compressor, fan, and defrost in refrigeration applications. This generation of controls has field selectable engineering units and temperature probe types in order to reduce the combination of parts that need to be stocked. A built in real time clock is used for HACCP logging of temperature alarms caused by temperatures out of their set limits or loss of power. The Intelligent Defrost parameters manage the defrost cycle in order to save energy cost. The digital input can be used to remotely trigger a defrost cycle, monitor cooler door status, or act as an external alarm. For programming multiple units, the model TS2-K configuration key can be used to quickly download parameter settings.