产品介绍：SCD系列 DIN导轨式温度/过程调节器 尺寸小，但可控制多路PID回路。每个SCD1000主控制器能够组合7个次控制器工作而不需任何接线。每台控制器都能接受一个通用输入信号，带一个继电器输出和一个用户选定的输出。输出方式可以双回路来控制加热和冷却，或一个回路加一路报警。它还支持64段连续变化控制。可采用RS-485 Modbus通讯接口连接电脑来用电脑编程设置。Inputs: Thermocouple, RTD, DC linear voltage, and DC currents.Supply Voltage: 24 VDC.Power Consumption: 3 W.Operating Temperature: 32 to 122ºF (0 to 50ºC).Memory Backup: Non-volatile.Control Output Ratings: Relay: 3 A @ 250 VAC resistive; Voltage pulse: 12 VDC, max. output current: 40 mA; Current: 4 to 20 mA output; Linear voltage: 0 to 10 VDC.Communication: RS-485 Modbus® A-5-11/RTU communication protocol.Weight: 2.7 oz (76.5 g).Agency Approvals: CE, RoHS, cULus.

产品介绍：TCS系列 热电偶温度开关用于加热或冷却系统里监测和控制温度。它的量程范围宽，带两个可设定的报警点，自带蜂鸣器来报警或故障错误提醒。用户能自己设定设定点，加热/冷却控制方案，循环控制时间，报警设定，负荷状态和探头调整。TCS热电偶温度开关带有设置参数密码保护，故障错误/报警指示。它采用了明亮的LED数显。可采用通用配置电钥（需另外购买）来批量快速配置参数。 TCS系列还包括了用于盘面安装的卡件，接线板保护盖和操作手册。Probe Range: 32 to 999°F (0 to 700°C) for Type J thermocouple; 32 to 999°F (0 to 999°C) for Type K or S thermocouples.Input: Type J or K thermocouple.Output: SPDT relay rated 16 A @ 240 VAC resistive.Horsepower Rating (HP): 1 HP.Control Type: ON/OFF.Power Requirements: 115 VAC, 230 VAC, 12 VAC/VDC, or 24 VAC/VDC(depending on model).Accuracy: ±1% FS.Display: 3-digit, red, 1/2" (12.7 mm) digits, plus sign.Resolution: 1°.Memory Backup: Nonvolatile memory.Temperature Limits: Ambient: 32 to 158°F (0 to 70°C); Storage: -4 to 176°F (-20 to 80°C).Weight: 2.3 oz (65 g).Front Panel Rating: IP64.Agency Approvals: CE, cURus

产品介绍：TS2系列 数显温度开关用于监控加热/冷却系统，它有十二种可编程的功能可为不同的应用场合定制配置。采用了15(5) Amp的单刀双掷继电器输出来驱动马达，压缩机或风机。为了更方便设备生产厂家，TS2还可以采用一键配置的方式来批量配置多台仪表。配置多台仪表非常简单，先设置好一台仪表，然后连接上配置电钥（需另外购买），按键下载这台仪表的配置参数到电钥上。当连接电钥到任何一个温度开关上按一次按键就能上载这些配置参数而配置好温度开关。TS2的功能还有：设定点可调，定时化霜，压缩机平均时间，延时控制。采用密码保护按键设置。TS2数显温度开关和PTC （1000欧姆，摄氏25度）配套使用，需单独购买。Probe Range: -58 to 302°F (-50 to 150°C).Input: PTC thermistor (1000Ω @ 25°C).Output: 16 A SPDT relay @ 250 VAC resistive 5 A inductive.Horsepower Rating (HP): 1 HP.Control Type: On/off.Power Requirements: 115 VAC, 230 VAC, 12 VAC/VDC, or 24 VAC/VDC.Accuracy: ±1% FS.Display: 3-digit, red, 1/2" digits.Resolution: 1°.Memory Backup: Nonvolatile memory.Temperature Limits: Ambient: 32 to 158°F (0 to 70°C).Storage Temperature: -4 to 176°F (-20 to 80°C).Weight: 2.3 oz (65 g).Front Panel Rating: IP64.Agency Approvals: CE, cURus.

产品介绍：DA-7035N系列 温度开关 采用了经久耐用的DA压力开关的设计和元件。采用了波登管，使得灵敏度高，寿命长。它的回差全范围可调，应用范围广。透明的面板，外面可调设定点，使用方便快捷。Service: Compatible liquids or gases.Wetted Materials: Bulb and connection: 304 SS.Temperature Limit: Process: See model chart on catalog page; Ambient: 180°F (82°C).Pressure Limit: 300 psi (20.6 bar).Enclosure Rating: General purpose. Optional weatherproof and explosion-proof.Repeatability: ±1% of FS.Switch Type: SPDT snap switch. Optional DPDT snap and a variety of mercury switches.Electrical Rating: 10 A @ 120/240/480 VAC.Electrical Connections: Screw terminal.Conduit Connection: 7/8" (22.23 mm) hole for 1/2" (12.7 mm) conduit hub.Process Connection: 3/4" male NPT. Other sizes available.Mounting Orientation: Vertical and level.Set Point Adjustment: External knobs for set point and reset point.Weight: 5 lb (2.3 kg).Deadband: Adjustable from minimum in model chart to full range. Optional low fixed deadband.Capillary: 6' (1.8 m) standard. Ranges 1N - 7N, and 10N: copper. Ranges 8N, 9N, 11N: 304 SS.Set Point Scale: Indication in °F and °C.Options: See switch type, see enclosures, fixed deadband, longer or shorter capillary, armored capillary, wells, two stage, 1/2" or 1" connection sizes, manual reset