产品介绍：SITRANS LVL100是一款一体式振动物位开关，用于诸如溢流、高、低和所需的应用，还有泵保护。对于有限空间内的使用是理想的。SITRANS LVL100是一款一体式物位开关，是为了过程技术的所有领域中的工业使用而设计的，可以同液体和浆体一起使用。其插入长度仅为40 mm (1.57“),SITRANS LVL100可以被安装在小管道或有限空间应用中。它几乎不受液体的化学和物理属性的影响。LVL100亦可在包含湍流、气泡、泡沫、积累或强外部振动的不同应用中使用。音叉是压电通电的，以大概为1200Hz的机械共振频率振动。当音叉被介质覆盖的时候振动频率就改变，这个改变是由集成的振荡器检测到的，然后转换为一个开关命令。集成的电子器件估算物位信号，然后输出一个开关信号，直接地操作连接的设备。关键应用：液体和浆体中的使用、物位测量、溢出和空运行保护详情范围40 mm (1.5”)插入空间过程温度-40 – 150 °C (-40 – 302  °F)过程压力-1 – 64 bar g (-14.5 – 928 psi g)特点液体经验证的诊断物位开关技术有限空间应用的一体式40 mm (1.57”)插入长度腐蚀、振动损失或压力驱动的输送管线断裂的故障监控

产品介绍：SITRANS LVL200是一款标准型振动物位开关，用于诸如溢流、高、低和所需应用的所有液体和浆体应用中的使用，还有泵保护。用于SIL-2应用中的使用。SITRANS LVL200是一款一体式物位开关，是为了过程技术的所有领域中的工业使用而设计的，可以同液体和浆体一起使用。其插入长度仅为40 mm (1.57“),SITRANS LVL100可以被安装在小管道或有限空间应用中。LV200可以用于测量*小密度大于0.5 g/cm³ (0.018 lbs/in³)的产品。LVL200亦可在包含湍流、气泡、泡沫、积累或强外部振动的不同应用中使用。SITRANS LVL200通过频率估算连续地监控故障，提供音叉强腐蚀或损坏的、振动损失、或压力驱动的管线断裂的早期检测。音叉是压电通电的，以大概为1200Hz的机械共振频率振动。当音叉被介质覆盖的时候振动频率就改变，这个改变是由集成的振荡器检测到的，然后转换为一个开关命令。集成的电子器件估算物位信号，然后输出一个开关信号，直接地操作连接的设备。关键应用：液体和浆体中的使用、物位测量、溢出和空运行保护。详情范围40 mm – 4 m (1.5” – 13 ft)过程温度-50 – 250 °C (-58 – 482 °F)过程压力 -1 – 64 bar g (-14.5 – 928 psi g)特点液体经验证的诊断物位开关技术有限空间应用的一体式40 mm (1.57”)插入长度腐蚀、振动损失或压力驱动的输送管线断裂的故障监控高物位和空运行应用的SIL 2资格卫生的过程连接件

产品介绍：Pointek ULS200是一款带两个开关点的超声波非接触开关，用于多种工业中批量固体、液体和浆体的物位检测；对于粘性原料是理想的开关。批量固体的测量范围**为3 m (9.8 ft)，液体和浆体的为5 m (16.4 ft)。不同于侵入式接触设备，它在传感器上没有原料积累。该物位开关有一个坚固的设计，在一个耐用的设备中组合了传感器和电子器件。它没有移动部件，几乎是不需要维护的。该传感器有可用的ETFE或PVDF共聚物的，对于大多数化学物是惰性的。这意味着该设备可以在化学、石油化学、水和废水行业。ULS200的卫生型，带一个工业标准的法兰选项，在应用中可易于被移除以进行清理。它因此满足在食品、饮料、制药行业中使用的前提。Pointek ULS200提供了优越的性能的同时亦减少了维护、停工、设备更换成本。关键应用：液体、浆体、流体原料、塞紧的滑道检测、化学行业详情范围液体：0.25 m – 5 m (0.8 – 16 ft) 固体：0.25 m – 3 m (0.8 – 10 ft)过程温度-40 – 60 °C (-40 – 140 °F)过程压力高至0.5 bar g (7.25 psi g)特点用于高-高、高、低、低-低物位警报的2开关输出或泵启/停控制集成温度补偿AC或DC电源电子器件支持故障安全功能螺纹和卫生装配钳状过程连接件聚碳酸酯或铝外壳，类别6/NEMA 6/IP67简单的双按钮编程

OLS系列 光学液位开关价格低，坚固耐用，稳定可靠。不带有任何可移动的部件，反应速度快。它带有红色和绿色的LED状态指示灯。有三种材质供选择：316不锈钢，聚砜，PFA工程塑料。结构小巧，可任意方向安装。工作原理OLS光学液位开光采用了发射红外线的LED，光线射入棱镜后进行两个90°的折射回到光电晶体管，由于棱镜周围是气体，光源就会返回光电晶体管，当液体处于光源和棱镜的接触点时，光就会折射入液体中而不会射入并触发光电晶体管。

A unique, patented Magnetic Linkage isolates the electrical compartment from controlled product, reducing maintenance and improving sensitivity. The sealed switch compartment and sealed leads yield the utmost in reliable operation. A wide selection of diaphragms and switches is available with choices of flange or suspension mounting to fit your specific application. The dry level Ultra-Mag™ Level Switch is extremely sensitive and very economical. The magnetic linkage makes this simple explosion-proof diaphragm switch the most rugged and reliable level control for a variety of products.Mounting Selection: A choice of either suspension or flange mounting is available to match your application. Flange mounting is the best choice for control of low or intermediate level in vessels containing granular product that does not "bridge", "rathole", or otherwise build up on vessel walls. Choose suspension mounting for high level in vessels and for better operation with "bridging" product. See below for more information on suspension and flange mounting kits. Note that the mounting configuration is represented by the letter "S" for suspension or "F" for flange which is the second digit in the part number.Diaphragm Selection: A wide variety of diaphragms is available to match product bulk density, flowability, abrasiveness and temperature requirements while providing maximum sensitivity. The best choice for vessels subject to pressure or vacuum is "breathable" fabric (P Series), requiring no venting. Non-porous elastomer (G Series) type diaphragms are the best choice for more abrasive product and broader temperature range applications. Venting is always required with the G series and if used in pressurized vessels, venting to the tank atmosphere is required to allow pressure equalization. A slide rule "Diaphragm Selector" is available from the factory to help you choose the diaphragm best suited to your application.Suspension Mounting is normally used for high level monitoring in vessels. For product over 20 lbs./cu. ft., the level switch (diaphragm face) should be located about 1/3 of the distance from the vessel wall to the point of entry of the product. For product less than 20 lbs./cu. ft., the unit should be located closer to the point of entry of the product, about 1/2 the distance from the vessel wall to the point of entry. Pressure required to depress the diaphragm and trip the switch is in the range of 5-15 oz in the horizontal direction (perpendicular to the diaphragm). Suspension mounting provides the easiest vertical adjustment capability, greatest sensitivity and best maintenance conditions.Suspension Assembly Kits: Pre-assembled kits are available from the factory, or you can build your own kits using standard pipe fittings. Pipes and fittings are normally galvanized steel, but aluminum and stainless steel pipes and fittings are available. Units pictured above are secured to a steel cover plate that rests on a rectangular steel flange welded into the top of the vessel. Aluminum and stainless coverplates and flanges are also available. Standard 48" long x 1" pipe provides working depth (WD) up to 48". Longer pipe (to provide greater WD) is available. GS Series switches have upper (L1 = 28" standard) and lower (L2 = 20" standard) 1" pipes, with a tee (for stilling pot) in between. A stilling pot is required to equalize pressure and keep dirt from building up behind the diaphragm. PS series require a 1/2" conduit in 1" suspension pipe for explosion-proof applications. The 1/2" conduit (56" standard length) is a standard part of the GS series assembly.

The Series PLS2 is an electromechanical level switch designed for level monitoring of bulk materials. The rotating measuring vane is driven by a brushless synchronous motor at one revolution per minute. As product builds up, the paddle rotation is impeded and the resulting motor torque activates the output switch and stops the motor. A spring mechanism reactivates the motor and returns the switch to normal state when the material no longer impedes the paddle rotation. A torque adjusting mechanism eliminates the need for different sized paddles. The PLS2 is designed with the industry standard 1-1/4" male NPT connection and unit can be side or top mounted.

PLS系列 旋叶式料位开关 采用磁力驱动，这个传承了我们的Mark系列阀位指示系列产品几十年的制造经验。每分钟一转转速的电机采用磁力驱动旋叶。当物料料位升高阻挡旋叶而产生的力矩使得开关动作，并切断电机电源。当物料料位下降，不阻挡旋叶，弹簧的回力使得开关回位，电机也开始带动旋叶旋转。标准配置是全天候防护，可选防爆型的，它可侧面安装或顶部安装。PLS型料位开关的工艺连接采用工业标准的1-1/4" NPT 外螺纹连接，可选法兰连接方式。

DBLM系列 小型旋叶式料位开关可靠耐用，用于干物料的料位监测，特别适用于安装空间受到限制的场合，这款小型的料位开关监测物料的高，中和低位，避免溢出，堵塞或空罐等。它以每分钟一转的速度由电机带动四个塑料叶片旋转，当物料阻止它旋转时，它切断电机电源，触发开关动作。DBLM可选择1-1/4" 到 3/4"异径接头来取代标准的接头。