1" NPT 安装黄铜或铸铁外壳1 ~ 3 探头3J系列微型接头具有1" NPT主体和外壳，适合空间有限、无压力场合的多个探头应用（对于单探头应用，我们建议使用3E1接头）典型应用:       非压力容器小型容器

食品级连接尼龙  66 和不锈钢1 ~ 4 探头FDA       认证材质，*多可容纳       4       个       316       不锈钢探头，专为食品、饮料、制药行业等苛刻洁净应用而设计。接头拆卸快速，便于清洗和消毒. 拆卸简单便于清洗 CSA 认证 FDA 认证典型应用:  食品饮料 制药 CIP清洗

食品级连接尼龙 66 Teflon® 涂层探头1 ~ 4 探头专为食品、饮料、制药行业等苛刻洁净应用而设计。由FDA认证材料制成，*多可容纳4个特氟纶涂层探头，电极头抛光，可满足大多数应用需求。接头拆卸快速，便于清洗和消毒.拆卸简单便于清洗CSA 认证FDA 认证材质Applications:    食品饮料制药 CIP清洗 

平面安装PVC, 黄铜或 316 不锈钢1 ~ 3 个探头可固定1至3个探头，适合大气压下工作。开口储罐或封闭容器顶部平面安装。配套3R刚性或3 W悬挂式电极使用.CSA 认证 典型应用:    敞口储罐封闭容器水腐蚀性稀释液

Series DSSR DIN/Panel Mountable Solid State Relay features an internal heat sink, bistable clips for DIN rail or panel mounting and an LED indicator light. It is a completely solid state relay - it has NO moving parts. The DSSR provides reliable switching and long-life operation in applications where high inrush currents or induced currents can affect mechanical state relay operation. The compact housing also minimizes panel space.

The MTL7706/7787 is an intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer® transmitters approved for use in hazardous areas. These barriers limit the amount of energy allowed to pass into the hazardous area, which inhibit ignition in flammable atmospheres.

产品介绍：   由于斯派莎克SM双金属式疏水阀排放低于饱和温度的冷凝水，能利用冷凝水中的部分显热，因此对于能充分利用蒸汽显热的设备而言，该类疏水阀是理想的选择。双金属疏水阀是所有的热静力疏水阀中*坚固的，可耐水锤和腐蚀。按照本公司关于不同的应用场合选择不同类型的疏水阀原则，斯派莎克的双金属疏水阀专门设计成只适合一种应用工况，即积水可以接受甚至是有利的特殊应用工况。斯派莎克双金属疏水阀具有如下的特点：型号众多，适应广泛的压力和负载范围。灵敏的感应，能避免较大感温元件的热惯性。在低于饱和温度下排放冷凝水，能减少二次蒸汽的损失。耐水锤、腐蚀性冷凝水和冰冻。根据不同的容量采用独特结构的多爪型或圆片和弹簧组合的双金属元件。能自由排放空气，内置不锈钢过滤器。

The Series DCS/RDCS Springless Dust Collection Valves are ideal for use with the Series DCT1000 and Series DCT500 duct collection timer boards. A springless design offers not only durability, but also reliability for an exceptional cleaning pulse. Both the Series DCS and RDCS have the option for either coupling or NPT connections. The coupling connection allows for a quick and simple installation. Only the stub pipe and blowtube need to be cleaned and deburred before the valve is fit into position. The “T” Series DCS has female threaded connections and the “C” Series DCS has a coupling connection. Both the “T” and “C” versions have a 90° angle between the inlet and outlet: the most suitable configuration for pulse valve applications. The valves are offered in both integrated and remote coil configurations.